Real Time Transmission - Brother FAX-8250P Owner's Manual

58
C H A P T E R S I X
See
"One Touch
and Speed
Dial"
chap. 7
See
"Setting
Station ID"
chap. 4
If you try to scan in and store a 51st fax, the machine will send it
immediately, without storing it in memory.
If you get a MEMORY FULL message while scanning the first page of
a fax press Stop to cancel a scan. If you get a MEMORY FULL
message while scanning in a subsequent page, you'll have the option to
press Start to transmit the pages scanned so far, or to press Stop to
cancel the operation.
1
Make sure the document feeder is empty.
2
Place the document in the feeder.
3
Enter the fax number.
4
Press Start. The machine starts scanning the document and the
screen displays the job number (#XX) of the fax, and how much
memory is available. When the machine starts dialling you can
immediately repeat Steps 1 through 4 for the next fax.

Real Time Transmission

When Memory is full, the machine cannot continue to scan documents
into memory before sending. However, you can turn on REAL TIME
TX. Then place the documents in the feeder and enter the fax number.
As soon as the phone line is free, the machine starts dialling and sending
the fax.
1
Place the document in the feeder.
2
For the FAX-8250P, Press Menu, 3, 9.
For the FAX-8650P, Press Menu, 1, 3, 9.
The screen displays
9.REAL TIME TX
3
Press Set.
4
To change the default setting, press
and go to Step 7. ––OR–– For the next fax transmission only, press
or to select NEXT FAX ONLY.
REAL TIME TX:ON
5
Press Set.
6
For the next fax only, press
7
Press Set.
ACCEPTED
NEXT
1.YES 2.NO
or to select ON (or OFF)
or to select ON (or OFF).