Copy Contrast; Using The Options Key; Copy Mode (Type Of Original) - Brother MFC-6800 Owner's Manual

Copy Contrast

You can adjust copy contrast to make copies darker or lighter.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Use the dial pad to enter the number of copies you want (up to 99).
3
.
Press Contrast
4
Press to make a copy lighter, or
to make a copy darker, and then press
Menu/Set.
5
Press Copy—OR—

Using the Options Key

Use the Options key to set the resolution
copy options. See the explanations below the table.
Press
Menu Selections
Options
OPT:# OF COPIES
OPT:COPY MODE
OPT:STACK/SORT STACK/SORT
OPT:SPECIAL
OPT:PAPER TYPE

Copy Mode (Type of Original)

You can select the Copy resolution for your type of original. The default setting
is AUTO, which is used for originals that contain both text and photographs.
TEXT is used for originals containing only text.
photographs.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Use the dial pad to enter the number of copies you want (up to 99).
3
Press Options and
4
Press or to choose the type of original (AUTO,
press Menu/Set.
5
Press Copy—OR—
or for additional settings.
Press
NO. OF COPIES:XX
AUTO/TEXT/PHOTO
2IN1/4IN1/POSTER/OFF OFF
THIN/PLAIN/THICK/
THICKER/TRANSPARENCY
or to select OPT:COPY MODE
for additional settings.
Press or
(COPY MODE), SORT
Options Factory Setting
01
AUTO
STACK
PLAIN
PHOTO is used for copying
and then press Menu/Set.
TEXT or PHOTO), and then
M A K I N G C O P I E S
or special
11 - 5