Copy Contrast; Paper Type - Brother MFC-9880 Owner's Manual

Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting is AUTO, which is
used for originals that contain both text and photographs. TEXT is used for originals containing only
text. PHOTO is used for copying photographs.
1
Press Menu, 3, 1.
2
to choose the type of original (AUTO, TEXT or PHOTO), and then press Set.
Press or
3
Press Stop/Exit—OR—Press

Copy Contrast

You can adjust copy contrast to make copies darker or lighter.
1
Press Menu, 3, 2.
2
Press to make a copy lighter—OR—Press
3
Press Stop/Exit—OR—Press

Paper Type

You can use the following types of paper for copying. For the best print quality, select the type of
media that you use most often.
THIN (60-69 gsm)
PLAIN (70-95 gsm)
THICK (96-120 gsm)
THICKER (121-161 gsm)
1
Press Menu, 3, 3.
2
Press or to select your type of paper, and then press Set.
3
Press Stop/Exit.
58
Chapter 10
for additional settings.
for additional settings.
For thin paper or transparency
For ordinary plain paper
For heavy weight paper or rough paper
For heavier weight paper, rough paper or bond paper
to make a copy darker, and then press Set.