Setting Fax Storage; Backup Print - Brother MFC-6800 Owner's Manual

4
If your pager requires a PIN, enter the PIN, press #, press Redial/Pause, enter
your MFC telephone number followed by # #, and then press Menu/Set.
For example, 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
—OR—
If you do not need a PIN, press Redial/Pause, enter the fax number of your
MFC followed by # #, and then press Menu/Set.
For example, Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
5
Press Stop/Exit.
You cannot change a Paging number or PIN remotely.
Press Redial/Pause for each 3.5 second delay, as needed.
Note

Setting Fax Storage

If you set Fax Storage to ON, you will be able to retrieve fax messages from
another location using Fax Forwarding, Paging, or Remote Retrieval functions.
The LCD will indicate when you have a fax stored in memory.
1
Press Menu/Set, 2, 5, 2. The LCD
prompts you to choose a fax setting.
2
Press or to select
then press Menu/Set.
3
Press Stop/Exit.
If there are faxes in memory when you
turn the Fax Storage OFF, the LCD
prompts you to erase any faxes in
memory.
If you press 1, all fax data is erased and Fax Storage is turned off. If you press
2, data is not erased, and Fax Storage remains on.
(See
Printing a Fax in Memory

Backup Print

If you have set
as they are received into memory, This is a safety feature in ease the power goes
out so you won't lose your message.
9 - 2
R E M O T E F A X O P T I O N S
ON (or OFF), and
, page 5-5.)
FAX STORAGE to ON, your MFC automatically prints a faxes