Step1 Setting Up The Machine; Removing The Protective Parts; Installing The Handset; Loading Paper - Brother MFC-640CW Quick Setup Manual

STEP1
Setting Up the Machine
1
1 Removing the protective
parts
1
Remove the protective tape and scanner glass
protection sheet.
Improper Setup
DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.
2

Installing the handset

1
Connect the curled handset cord to the
handset.
4
3

Loading paper

You can load up to 100 sheets of 80 g/m
(20 lb) paper.
For details, see About paper in Chapter 1 of
the User's Guide.
1
Pull the paper tray completely out of the
machine and remove the output paper tray (1).
2
Press and slide the paper guide (1) to fit the
paper width.
1 1
3
Pull out the paper support (1) and unfold the
paper support flap (2).
Note
Use the paper support flap for Letter, Legal and A4
paper.
2
1 1
1
2