For Wired Network Interface Users; 10.2.4 Or Greater; For Mac Os ® 9.1 To 9.2; For Mac Os ® X 10.2.4 Or Greater - Brother MFC-640CW Quick Setup Manual

Installing the Driver & Software

For Wired Network Interface Users

®
For Mac OS X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-11.
1
Disconnect the machine from the power
socket.
2
Turn on your Macintosh
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OSX icon to install
the printer and scanner drivers. If the language
screen appears, choose your language.
5
Click MFL-Pro Suite to install.
®
.
6
Choose Wired Network Connection, and
then click Next. Follow the on-screen
instructions, and restart your Macintosh
7
After the DeviceSelector window appears,
connect the network interface cable to your
®
Macintosh and then to the machine.
Note
The DeviceSelector window will not appear if you
have connected a USB interface cable to the
machine before restarting your Macintosh
you are overwriting a previously installed version
of the Brother Software. If you encounter this
problem continue but skip steps 13 to 16. You
should choose your Brother machine from the
Model pop-up menu in the main screen of
ControlCenter2. For details, see Chapter 10 in the
Software User's Guide on the CD-ROM.
8
Lift the scanner cover to its open position.
9
Connect the network cable to the LAN socket
marked with a
LAN socket above and to the left of the ink
cartridge slots, as shown below.
Macintosh
®
.
®
or if
symbol. You will find the
®
29