Brother MFC-640CW Quick Setup Manual page 20

STEP2
Installing the Driver & Software
9
The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
Note
• If this window does not appear, use Windows
Explorer to run the setup.exe program from the
root folder of the Brother CD-ROM.
• If you see the following screen, click OK to install
the Windows
installed your PC may restart. Then the installation
will automatically continue.
If the installation does not continue automatically,
open the main menu again by ejecting then
reinserting the CD-ROM disc or double-click the
setup.exe program from the root folder, and
continue from Step 9 to install the MFL-Pro Suite.
10
Choose Wired Network Connection, and
then click Next.
11
After reading and accepting the ScanSoft
PaperPort
Yes.
12
The installation of PaperPort
automatically start and is followed by the
installation of MFL-Pro Suite.
18
®
updates. After the updates are
®
9.0SE License Agreement, click
®
9.0SE will
13
When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
14
The installation of the Brother drivers will
®
automatically start. The installation screens
appear one after another, please wait for a
while.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
15
If the machine is configured for your network,
choose the machine from the list, and then click
Next.
Note
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
16
If the machine is not yet configured for use on
your network, the following screen appears.
®
Click OK.
The Configure IP Address window will
appear. Enter the proper IP address
information for your network by following the
on-screen instructions.
®
Windows