Brother MFC-640CW Quick Setup Manual page 34

STEP2
Installing the Driver & Software
For Mac OS
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-11.
1
Disconnect the machine from the power
socket.
2
Turn on your Macintosh
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OS 9.1-9.2 icon to
install the printer and scanner drivers. If the
language screen appears, choose your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and restart
your Macintosh
7
Lift the scanner cover to its open position.
32
®
9.1 to 9.2
®
.
®
.
8
Connect the network cable to the LAN socket
marked with a
LAN socket above and to the left of the ink
cartridge slots, as shown below.
9
Carefully guide the network cable into the
trench as shown below, following the trench
around and toward the back of the machine.
Then, connect the cable to your network.
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
In case of using both USB and LAN cables, route
both cables into the trench with one on top of the
other.
10
Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
®
Macintosh
symbol. You will find the