Registering The Distinctive Ring Pattern - Brother MFC-3220C User Manual

■
The machine will only answer calls to its registered number.
■
The first two rings are silent on the machine. This is because the
fax must «listen» to the ring pattern (to compare it to the pattern
that was 'registered'). (Other telephones on the same line will
ring.)
■
If you program the machine properly, it will recognize the
registered ring pattern of the 'fax number' within 2 ring patterns
and then answer with a fax tone. When the 'voice number' is
called, the machine will not answer.

Registering the Distinctive Ring pattern

Very important!
After you have set the Distinctive Ring feature to ON, the receive
mode is set to Manual automatically. Unless you have a TAD or
Voice Mail set up on the Distinctive Ring number, Manual mode
means you must answer all the calls yourself. You can not change
the receive mode to the other mode while the Distinctive Ring is set
to on.
1
Menu/Set
Press
2
Press
Menu/Set
Press
3
Press
Menu/Set
Press
(You will hear each pattern as you scroll through the four
patterns. Make sure you choose the pattern that the telephone
company gave you.)
4
Stop/Exit
Press
Distinctive Ring is now set to on.
5 - 12 SETUP RECEIVE
2 0 1
, , , .
or to select Set .
.
or to select the stored ring pattern you want to use.
.
.
1.Distinctive