Main Parts Of Cooling Unit; Preparing For Operation - Kemppi KEMPARC COOL 10 Operating Manual

2.4.2 main parts of cooling unit

D
B
A
Front machine
A
B
C
D Filling hole
Back side
E
F
G Cooling water output hose
H Cooling water input hose
2.5

prepAring FOr OperAtiOn

EN
NOTE!
injury, seek for medical advice.
See also 2.4.2. Main parts of cooling unit.
1. Connect the mains voltage and control connectors of the cooler unit
2. Attach the power supply on the KempArc™ Cool 10 cooler.

TEST
Housing
Test switch
Overheat control lamp
Mains voltage connection cable
Control cable
Cooling liquid is injurious! Avoid also contact with skin or eyes. In case of
to the corresponding connectors on the base of the power supply.
The connection can be established through the base of the power
supply when the devices are separated or through the right side of the
KempArc™ Cool 10 cooler by removing the right side plate.
C
E
F
H
G