Table of Contents
Advertisement
Available languages
Available languages
CLEANING THE MILK FROTHING JUG
Open the milk frothing jug and take its compo-
nents apart.
Remove the steam wand from the milk whip-
ping jug cover.
Clean the steam wand with a brush to remove
all milk residues.
MAINTENANCE AND CLEANING
Wash the jug, the whisk and the steam nozzle
in cold water or in a dishwasher at low tempera-
ture. Wash the components separately.
Fit the steam wand onto the milk whipping jug
cover.
Fit the cover onto the milk whipping jug.
Close the milk whipping jug with its cover and
pay attention to the correct position and direc-
tion of the cover.
EN
19
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CLASSY PLUS and is the answer not in the manual?
Questions and answers
The orange light for water tank removed is on but the water tank is in place. When I turn on and off it is not on but when I try and brew the light comes back on and will not brew.
The orange light for the water tank on the LAVAZZA CLASSY PLUS may be on even when the water tank is in place due to the following reasons:
1. No water in the tank – Ensure the tank is filled with fresh drinking water.
2. Tank not inserted correctly – Remove and correctly reinsert the water tank.
3. No water flow in the hydraulic circuit – Disconnect the power cord, wait 10 seconds, reconnect it, and turn the machine on. Wait for the heating cycle to complete, as the machine will automatically attempt to fill the hydraulic circuit.
If the issue persists, contact Lavazza Customer Service.
This answer is automatically generated