EN
PREPARATION WITH MILK BREWING
When the milk frothing jug is inserted, the ma-
chine will only enable the milk-based selections.
The coffee icons will be disabled.
The following milk dispensing supply keys will
light up to a steady white light.
Macchiato
Cappuccino
"
Latte
Milk
Double Shot coffee function
(specific for 2 coffees capsule)
The milk frothing jug features three level marks.
Open the milk frothing jug and fill it to the de-
sired level.
Only use cold milk at fridge temperature of 39.2
to 46.4°F (4 to 8°C). Do not use milk at room
temperature. Using veggie milk will not ensure
perfect
results.
Pour the exact measure of milk as indicated
on the jug. Do not use too much or too little
milk. In both cases, hot milk will leak out of
the container.
14
PREPARATION WITH MILK BREWING
selection
selection
"
selection
Close the jug, then place it on the machine.
When the milk frothing jug is correctly positioned,
the machine will emit a beeping sound.
When the capsule loading handle is open, in-
sert the LAVAZZA capsule in the appropriate
pod-holder.
Verify that a capsule has been inserted; oth-
erwise, the machine will delivery water in-
stead of coffee.
Verify that enough water is found in the
tank before preparing for brewing
Need help?
Do you have a question about the CLASSY PLUS and is the answer not in the manual?
Questions and answers
The orange light for water tank removed is on but the water tank is in place. When I turn on and off it is not on but when I try and brew the light comes back on and will not brew.
The orange light for the water tank on the LAVAZZA CLASSY PLUS may be on even when the water tank is in place due to the following reasons:
1. No water in the tank – Ensure the tank is filled with fresh drinking water.
2. Tank not inserted correctly – Remove and correctly reinsert the water tank.
3. No water flow in the hydraulic circuit – Disconnect the power cord, wait 10 seconds, reconnect it, and turn the machine on. Wait for the heating cycle to complete, as the machine will automatically attempt to fill the hydraulic circuit.
If the issue persists, contact Lavazza Customer Service.
This answer is automatically generated