Table of Contents
Advertisement
Available languages
Available languages
PREPARATION WITH MILK BREWING
Lower the capsule loading handle.
Press the milk selection you wish to dispense.
After a few seconds, the machine will start
warming and frothing the milk.
When ready, the machine will deliver the mea-
sure of coffee in the jug and will automatically
stop.
Do not use the milk frothing jug to store bev-
erages. Always clean the jug thoroughly after
it is used.
DOUBLE SHOT COFFEE FUNCTION
(WITH MILK JUG)
Open the milk frothing jug and fill it to the de-
sired level.
When the capsule loading arm is open, insert
the 2 coffee capsule in the appropriate
pod-holder.
Press the double shot button
Then press the desired milk dispensing button.
After a few seconds the machine will start
warming and frothing the milk.
When ready, the machine will deliver the DOU-
BLE SHOT coffee in the jug and will automati-
cally stop.
The machine will automatically stop delivering
when the programmed measure is reached.
EN
icon
.
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CLASSY PLUS and is the answer not in the manual?
Questions and answers
The orange light for water tank removed is on but the water tank is in place. When I turn on and off it is not on but when I try and brew the light comes back on and will not brew.
The orange light for the water tank on the LAVAZZA CLASSY PLUS may be on even when the water tank is in place due to the following reasons:
1. No water in the tank – Ensure the tank is filled with fresh drinking water.
2. Tank not inserted correctly – Remove and correctly reinsert the water tank.
3. No water flow in the hydraulic circuit – Disconnect the power cord, wait 10 seconds, reconnect it, and turn the machine on. Wait for the heating cycle to complete, as the machine will automatically attempt to fill the hydraulic circuit.
If the issue persists, contact Lavazza Customer Service.
This answer is automatically generated