Setting Tone/Pulse Dialing Mode (For Canada Only); Details For Entering Text; Inserting Spaces; Making Corrections - Brother FAX 560 Owner's Manual

Setting Tone/Pulse Dialing Mode (For Canada Only)

Your fax machine comes set to accommodate tone (multi-frequency) dialing service.
If you have pulse (rotary) dialing service, you need to change the dialing mode.
1
Press Function/Set, 1, 5.
2
Press or
press Function/Set.
3
Press Stop to exit.

Details for Entering Text

When you are setting certain functions, such as the Station ID, you may need to enter
text into the fax machine. Most keys on the dial pad have three or four letters printed
above them. The keys for 0, # and
for special characters or operations.
By pressing the appropriate number on the dial pad the correct number of times, you
can access the character you want.
Press Key
2
3
4
5
6
7
8
9

Inserting spaces

If you want to enter a blank space, press

Making corrections

If you entered a letter incorrectly and want to change it, press
after the last correct letter. Then press Stop; the letters above and to the right of the
cursor are deleted. Re-enter the correct text and/or digits. You can also back up and
type over incorrect letters.
to select TONE or PULSE and
don't have printed letters because they are used
one time two times
A B
D E
G H
J K
M N
P Q
T U
W X
DIALING:TONE?
DIALING:PULSE?
three times four times
C 2
F 3
I 4
L 5
O 6
R S
V 8
Y Z
twice.
I N I T I A L S E T U P
to move the cursor
4 - 2