Wacker Neuson RD40 Instruction Manual page 224

Auxiliary equipment
HAMM line spreader
224
Vibration/oscillation is preselected.
a
Swivel lever [4] into position II.
Chip spreader is preselected.
a
Spreading operation
Selecting the operating mode
Prerequisite: Electrical system is ON.
Press the switch [1].
Manual indicator LED lights up.
a
The chip spreader can only be switched on and off on the drive lever.
a
Press the switch [1].
Automatic indicator LED lights up.
a
The chip spreader is switched on and off automatically depending on
a
the driving speed. The chip spreader is switched off at a low or high
speed.
Preselecting the chip spreader
Prerequisite: With tandem rollers (VV/VO), the preselection lever is set to
chip spreader.
Press switch [2] repeatedly until the indicator light for the rear drum
[3] lights up.
The chip spreader is preselected at the rear.
a
The front drum can be operated in vibration mode.
a
Activating the chip spreader
Press switch [4].
The indicator light [5] lights up.
a
The chip spreader is activated.
a
Spreading chips
Press switch [6] on the drive lever.
Depending on the settings, the chip spreader works immediately
a
(manual) or when driving starts (automatic).
5 1 4 2 3 6
BA RD40_RD45 en 00