Replacing The Filter Insert In The Pressure Filter For The Hydraulic System - Wacker Neuson RD40 Instruction Manual

Maintenance
Hydraulic oil supply
4.04.03

Replacing the filter insert in the pressure filter for the hydraulic system

144
Also actuate the steering.
The pipes and hose lines will be filled with oil and vented.
a
Check oil level with the diesel engine at a standstill. Top up oil if
necessary.
Check hydraulic system for leaks.
$ Only lubricants with this symbol are permitted
page 162 onwards).
Switch off diesel engine and remove ignition key.
Allow machine to cool down less than 30 °C (86 °F).
Unscrew the barrel casing [1].
Unscrew the filter insert [2] from the filter head and replace with a
new one.
Clean the inside the barrel casing [1].
Screw in and tighten the barrel casing [1] in the filter head again.
Check hydraulic system for leaks.
("Technical data",
2
1
BA RD40_RD45 en 00