Setting Watering Start Times - DIG 400A Series Instruction Manual

4. Press again and 1 hour appears flashing.
5. Press again and 1 DAY appears flashing. To select the number of days
between watering to 10 days, press
To set the controller back to specific days mode:
1. Push the button until – START EVERY and the
left of the screen.
2. Push the until the days of the week appear at the top of the screen.
Press the button to proceed to the next step START TIME
the program.

11. SETTING WATERING START TIMES

The 400A Series controller can have up to four separate irrigation start times
per day. (Note: if the controller is set to water every X hours, only one start time is
available to be programmed.)
To set a start time,
1. Press the
last start time programmed in START 1 appears.
button until the
until 10 appears on the display.
icon appears. START 1, displays OFF or the
13
icon appear at the bottom
or to review