DIG LEIT-2 Operating Instructions Manual

DIG LEIT-2 Operating Instructions Manual

2-way radio controller
Hide thumbs Also See for LEIT-2:

Advertisement

Quick Links

8.
Warranty
DIG CORPORATION warrants these products to be free from defects in material and workmanship for
a period of three years from date of purchase. This warranty does not cover damage resulting from
accident, misuse, neglect, modification or improper installation. This warranty shall extend only to
the original purchaser of the product for use by the purchaser. This warranty shall not cover batteries
or any malfunction of the product due to battery failure. The obligation of DIG CORPORATION under
this warranty is limited to repairing or replacing at its factory this product which shall be returned to
the factory within three years after the original purchase and which on examination is found to
contain defects in material and workmanship.
DIG CORPORATION SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY KIND; THE SOLE OBLIGATION OF DIG BEING LIMITED TO REPAIR OR
REPLACEMENT OF DEFECTIVE PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
Unattended use for prolonged periods without inspection to verify proper operation is beyond the
intended use of this product, and any damage resulting from such use shall not be the responsibility
of DIG CORPORATION. There are no warranties which extend beyond the description on the face
hereof. In the case of purchase of the product for use other than, for irrigation purposes, DIG
CORPORATION hereby disclaims any implied warranties including any warranties of merchantability
and fitness for a particular purpose. In the case of the purchase of the product for personal, family or
household purposes, DIG CORPORATION disclaims any such warranties to the extent permitted by
law. To the extent that any such disclaimer or implied warranties shall be ineffectual, then any
implied warranties shall be limited in duration to a period of three years from the date of the original
purchase for use by the purchaser. Some states do not allow limitation on how long an implied
warranty lasts, so the above limitation may not apply to you.
In order to obtain performance under this warranty, the unit must be returned to the factory, along
with proof of purchase indicating original date of purchase, shipping prepaid, addressed as follows:
DIG CORPORATION, 1210 Activity Drive, Vista, CA 92081-8510. Repaired or replaced units will be
shipped prepaid to the name and address supplied with the unit returned under warranty. Allow four
weeks for repairs and shipping time. Repair of damaged units not otherwise within warranty may be
refused or done at a reasonable cost or charge at the option of DIG CORPORATION.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
1210 Activity Drive
Vista, CA 92081-8810, USA
E
Website:
http://www.digcorp.com
e-mail: dig@digcorp.com
022208 DIG CORP
26-061
Printed in the USA
2-Way Radio Controller
Operating Instructions
English
1

Advertisement

Table of Contents
loading

Summary of Contents for DIG LEIT-2

  • Page 1 DIG CORPORATION. There are no warranties which extend beyond the description on the face hereof. In the case of purchase of the product for use other than, for irrigation purposes, DIG CORPORATION hereby disclaims any implied warranties including any warranties of merchantability and fitness for a particular purpose.
  • Page 2: Table Of Contents

    2.2 Controller installation …………………………………………………12 the controller day and night in any kind of weather. The LEIT-2 controller is A. Valve box mounting dome ………………………………………12-13 operated using the LEIT RC2 remote control handset, which has an operating B.
  • Page 3: Technical Assistance

    • Consult DIG technician for help. WARNING: the user should make no field changes or modifications to the LEIT-2 controller or the LEIT RC2 handset. All adjustments and changes must be made at DIG’s facility under the specific guidelines suggested in our instruction manual. Any tampering or modification to the...
  • Page 4: Features

    • The LEIT-2 operates up to 2 Unimax S-305DC solenoids installed on most a. Valve box mounting dome, color: green valves using one of DIG’s solenoid valve adapters (Model 30-30) •...
  • Page 5: Tools And Supply Requirements

    STEP 1: Connect the two yellow sensor wires together (found on the A1 "O" ring B1 “O” ring C1 “O” ring D1 “O” ring E1 “O” ring F1 “O” ring LEIT-2 controller) so that the LEIT RC2 remote handset can identify the 200-014 200-021 200-012 200-015 200-014 200-014...
  • Page 6: Installation

    2.1 Solenoid and Valve Installation NOTE: Maximum operating pressure is up to 150 PSI (10.5 bar) Use DIG’s 305DC-XXX valve-assembly or Model S-305DC solenoid and select 7. After installation is complete, turn the water supply on and pressurize the the appropriate conversion adaptor for the valve(s) that will be used with the mainline.
  • Page 7: Controller Installation

    2.2 Controller Installation Option A: Valve Box Mounting Dome, color: green (model 30-830) 1. Lay the template on top of the rectangular or round irrigation box cover and drill 4-8 holes, make sure to review the template position on the valve box before drilling (see drilling instruction on the template) using 1/4”...
  • Page 8 pair for each valve). Each pair should consist of one white wire, and one about 3-4" (7-10 cm) from the controller and then, red or colored wire, preferably of differing colors. Each pair should be connect the controller output station wire (V1 red taped and marked separately at both ends, so that the wires do not get and white) to the incoming hot wires (#1 red or cross-connected (see 1).
  • Page 9: Valve Mounting

    3.1 Initiating Communication for the First Time Use the 2 yellow-colored, sealed sensor wires on the controller to signal to the LEIT-2 controller that it is about to be programmed. Splice the 2 yellow Option C: Valve Mounting (model 30-832) sensor wires together using waterproof connectors.
  • Page 10: Using A Sensor

    CLIENT ID: Troubleshooting CONNECT CONNECTED TO: CONNECT CONT. SETUP YES / NO The LEIT-2 wireless irrigation control system is a series of components 10:00 10:00 10:00 consisting of LEIT-2 ambient light powered 2 station controller, the RC2 CONNECTING UPDATE handset, S-305DC solenoids, solenoid adapters, hydraulic control valves, and SUCCESSFUL wires/splices.
  • Page 11: Troubleshooting Solenoids

    If the problem continues you may have an issue with the water passage down stream may be plugged and in controller wires and the waterproof connectors. need of cleaning. 2. The LEIT-2 controllers will only function with S-305DC solenoid or 305DC- 7. Solenoid parts list XXX valve Spring 3.
  • Page 12: Record Chart

    RECORD CHART PROGRAMMING QUICK REFERENCE CHART Customer ID Controller ID Handset ID Location / Address Keep this information in a safe place for your records...

This manual is also suitable for:

Leit rc2

Table of Contents