In-Unit Patient Beds; Viewing In-Unit Patients Experiencing An Alarm Condition; Viewing Patient Beds From Another In-Unit Cic Pro Center - GE ApexPro Operator's Manual

In-unit patient beds

Viewing in-unit patients experiencing an alarm condition

Viewing patient beds from another in-unit CIC Pro center

2001989-200E
You can view any in-unit patient bed that is on the Unity Network.
When an in-unit patient experiences an alarm condition, you can quickly display this
patient's data by displaying the single patient viewer.
You can use one of the following methods to display the single patient viewer of an
alarming patient bed:
Click in the patient window.
Click the alarm button.
The CIC Pro center can display an alarm button for a maximum of four patients. This
row of alarm buttons display across the top of the multi-patient viewer and show the
unit name, bed number, and the cause of the alarm.
The color of the alarm button indicates the severity of the patient alarm condition.
Red indicates a Crisis alarm condition, yellow indicates a Warning alarm condition,
an Advisory alarm condition, or a System Warning.
Another name for this row of alarm buttons is the Alarm Display Unit (ADU) line.
Alarm buttons, also known as Alarm Display Unit (ADU) line
When you have more than one CIC Pro center in your care unit, you can view
(monitor) a patient bed from another in-unit CIC Pro center.
Complete the following procedure to view (monitor) in-unit patient beds from another
in-unit CIC Pro center:
ApexPro™
Viewing real-time patient data
058A
7-5