GE ApexPro Operator's Manual page 174

Printing
Enable
Transmitter
Graph Check Box
Alarm graphs enabled/disabled
Graph paper out indicator
9-8
2. To disable the Transmitter Graph option, point and click with the mouse to
remove the check mark in the Enable Transmitter Graph check box.
This message line indicates whether the graph on alarm feature is on (Alarm Graph
ENABLED) or off (Alarm Graph DISABLED). This feature cannot be set on an
individual patient basis. Use the Alarm Graph option in the Telemetry Unit Defaults
tab sheet to set it for all patients admitted to the CIC Pro center.
NOTE
You must be in service mode to change the telemetry unit defaults.
When there is no graph paper in the writer (or the door is open), the message Graph
Paper Out/Door Open is displayed at the top of the screen.
When printing to a laser printer, a similar status message is displayed if the printer is
unable to print.
NOTE
Because the CIC Pro center can communicate with many laser printers, specific
status messages are not documented in this manual.
ApexPro™
357C
2001989-200E