Battery Installation - GE ApexPro Operator's Manual

Battery installation

2001989-200E
ApexPro ApexPro CH
Graph
(not available)
WARNING
INGESTION OF BATTERIES— Make sure the battery
compartment is closed completely and closely observe patients to
prevent ingestion of batteries.
CAUTION
Never store the transmitter with the batteries inside. Storing the
transmitter with the batteries inside may result in damage to the
transmitter.
CAUTION
GE recommends that you always replace both batteries at the same
time. Re-using old batteries or using a combination of old and new
batteries in the transmitter will compromise functionality of the
transmitter and increase the risk of fire hazard.
ApexPro™
Equipment setup
Function
When pressed, a 20-second graph strip is
printed on the writer or printer.
When pressed with an IMPACT.wf paging
system (version II or later) also available in
the same care unit, the View on Demand
feature (also called the Apex Graph Button
Push feature) is enabled. The IMPACT.wf
server generates a sample page of the
patient's ECG waveform and any other
enabled/monitored non-arrhythmia
parameters.
If pressed again, it generates both an
IMPACT.wf update and a standard ECG
waveform graph at the CIC Pro center. The
IMPACT.wf update is labeled Sample for
display on the IMPACT.wf receiver and
stored in history. Additionally, all receivers
assigned to the patient receive an update/
sample.
When pressed, a blue border displays
around the event bed and an alarm tone
sounds at the CIC Pro center. The message
Remote Event displays under the ECG
parameter window for approximately ten
seconds.It also generates a 20-second graph
and saves the event.
3-3