Bio-Gen Pro200 Motor Unit Contents; Accessories; Bio-Gen Pro200 Operating Instructions - PRO Scientific Bio-Gen PRO200 Operating Manual

Bio-Gen PRO200 Motor Unit Contents:

•
Motor unit with built-in speed control and separate on/off switch.
•
Instruction manual.
•
Tool kit. (Includes: safety clip, 1/4" hex key, screw driver)

Accessories:

Item No. Description
Bio-Gen PRO200 Homogenizer Stand Assembly: 8 ¼" x 7" vinyl padded base, 23 ½" post, and
80-20000
motor holder

Bio-Gen PRO200 Operating Instructions:

1) Assembly of the optional motor unit and stand p/n 80-20000 (If using without stand assembly begin with step
#2)
Figure 1. L-R, explosion drawing of p/n 80-20000 & p/n 80-20000
2) Check that the voltage quoted on the motor unit's type plate agrees with the available main voltage. Variations
of +/- 10% are permissible.
3) After all of the above assembly operations have been completed and the electrical connections checked, a test
run of the motor unit can be made. Do not use any generators /attachments at this time.
6