Pro250/250C Operating Instructions - PRO Scientific Bio-Gen PRO200 Operating Manual

PRO250/250C Operating Instructions:

1) Assembly of the optional stand assembly (If using without stand assembly begin with step #2)
Figure 2. L-R, explosion drawing of p/n 80-25000, p/n 80-25000 & p/n 80-01250
2) Check that the voltage noted on the back of the motor agrees with the available voltage. Variations of +/- 10%
are permissible.
3) Insert the female end of the power cord into the power inlet module located on the top of the unit and the male
end into the proper voltage outlet.
4) After all of the above assembly operations have been completed and the electrical connections checked, a test
run of the motor unit can be made. Do not use any generators/attachments at this time.
12