Table of Contents
Advertisement
12.
Declarations
12.1
Declaration of incorporation
in accordance with Directive 2006/42/EC, Annex II 1 B
The manufacturer, Siemens AG, D 46393 Bocholt, declares with regard to the partly
completed machinery,
‐
The special technical documents described in Annex VII B have been prepared.
‐
The following basic health and safety requirements set out in Directive 2006/42/EC, Annex I,
are applied and are satisfied:
1.1, 1.1.2, 1.1.3, 1.1.5; 1.2.4.4, 1.2.6; 1.3.1 ‐ 1.3.4, 1.3.6 ‐ 1.3.8.1; 1.4.1, 1.4.2.1;
1.5.1 ‐ 1.5.11, 1.5.13, 1.5.15, 1.5.16; 1.6.1 ‐ 1.6.3; 1.7.1, 1.7.1.1, 1.7.2, 1.7.3 ‐ 1.7.4.3
‐
The partly completed machinery must not be put into service until it has been established
that the machinery into which the partly completed machinery is to be incorporated has been
declared in conformity with the provisions of Directive 2006/42/EC, as appropriate.
‐
The manufacturer undertakes, in response to a reasoned request by the national authorities,
to transmit in electronic form relevant information about the partly completed machinery.
‐
The person authorised to compile the relevant technical documentation is:
Dr. Michael Christ (Director Engineering SEEK)
Herne, 2010‐08‐11
Herne, 2010‐08‐11
Declaration of Incorporation
REDUREX
Gear Unit
for driving machines in general engineering applications:
Dr. Michael Christ (Director Engineering SEEK)
Cengiz Yalcin (Director Business Subsegment SEY1)
BA 5200 EN 08/2010
64 / 65
Advertisement
Table of Contents
