Declarations; Declaration Of Incorporation - Siemens FLENDER PLANUREX 2 PBUC Series Assembly And Operating Instructions Manual

12.

Declarations

12.1

Declaration of incorporation

in accordance with Directive 2006/42/EC, Annex II 1 B
The manufacturer, Siemens AG, 46395 Bocholt, Germany, declares with regard to the partly completed
machinery,
‐ The special technical documents described in Annex VII B have been prepared.
‐ The following basic health and safety requirements set out in Directive 2006/42/EC, Annex I,
are applied and are satisfied:
1.1, 1.1.2, 1.1.3, 1.1.5; 1.2.4.4, 1.2.6; 1.3.1 ‐ 1.3.4, 1.3.6 ‐ 1.3.8.1; 1.4.1, 1.4.2.1;
1.5.1 ‐ 1.5.11, 1.5.13, 1.5.15, 1.5.16; 1.6.1 ‐ 1.6.3; 1.7.1, 1.7.1.1, 1.7.2, 1.7.3 ‐ 1.7.4.3
‐ The partly completed machinery must not be put into service until it has been established
that the machinery into which the partly completed machinery is to be incorporated
has been declared in conformity with the provisions of Directive 2006/42/EC, as appropriate.
The manufacturer undertakes, in response to a reasoned request by the national authorities,
to transmit in electronic form relevant information about the partly completed machinery.
‐ The person authorised to compile the relevant technical documentation is:
Dr. Nico van de Sandt (Head of Engineering DAE)
Voerde, 2012‐03‐19
Voerde, 2012‐03‐19
Declaration of incorporation
Planetary Gear Unit Type
PLANUREX 2
PBUC
Sizes 21 to 42
for bucket wheel drives
for use in bucket­wheel excavators:
Dr. Nico van de Sandt
(Head of Engineering DAE)
Dr. Bernhard Hoffmann
(Vice‐President Business Subsegment DA)
BA 9213 en 03/2012
54 / 55