Manual Transmission; Automatic Transmission; Manual And Automatic Fax Redial - Brother FAX 750 Owner's Manual

50
C H A P T E R S I X
See
Resolution
p. 55
See
One-Touch
Dialing
p. 68
See
Speed Dialing
p. 68
Press Resolution (before you send the fax) to select the resolution for the
document you're sending.
DO NOT use curled, wrinkled, folded or ripped paper, or paper with
staples, paper clips, paste or tape attached. DO NOT use cardboard,
newspaper or fabric.
Make sure documents written with ink are completely dry.

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving
tones before sending the fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone
—OR—press
Hook
3
Enter the fax number you want to call (you can enter the digits using the
dial pad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-index).
4
When you hear the fax tone, press
5
If you're using the handset, hang up.

Automatic Transmission

This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset,
or press or
Hook Speaker Phone
1
Insert the document face down in the feeder.
2
Enter the fax number from One Touch, Speed Dial, Tel-index or the dial pad.
3
Press .
Start

Manual and Automatic Fax Redial

If you're sending a fax manually and the line is busy, press
the number.
If you're sending a fax automatically and the line is busy, the FAX/MFC
will redial automatically up to three times at 5 minute intervals.
or and listen for a dial tone.
Speaker Phone
.
Start
.
to retry
Redial/Pause