Setting Toll Saver; Icm Recording Monitor; Recording A Memo - Brother FAX 750 Owner's Manual

M E S S A G E C E N T E R ( F O R F A X 8 7 0 M C A N D M F C 9 7 0 M C O N L Y )
See
Setting
Ring Delay
p. 35

Setting Toll Saver

When you set the toll saver feature, the FAX/MFC answers after four rings
if you don't have messages, and after two rings if you do have messages.
This way, when you call the FAX/MFC, if it rings three times, you know
you have no messages, and can hang up, avoiding any toll charge.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver
must be off for the FAX/MFC to operate using your Ring Delay setting.
1
Press , ,
Function
2
2
Press or to select TOLL SAVER (or RING DELAY).
3
Press when the screen displays your selection.
Set
4
Press or to select ON.
5 Press Set .
6 Press Stop to exit.

ICM Recording Monitor

This feature lets you turn OFF (or ON) the speaker volume for voice
messages. When you turn the monitor OFF, you will not hear messages as
they come in.
1
Press , ,
Function 8
2
Use or to select OFF (or ON).
3
Press when the screen displays your selection.
Set
4
Press to exit.
Stop

Recording a Memo

A memo is stored and played as a voice message.
1
Press Record .
2
When the display prompts you to pick up the handset, speak into the
handset to record your memo. Your recording can be as long as the
Incoming Message Maximum Time (
3
Press or replace the handset when you're finished.
Stop
.
1
.
5
Function
, , ).
8 4
85