Copy Functions; Multiple Copies; Reducing And Enlarging Copies - Brother FAX 750 Owner's Manual

Copy Functions

Your FAX/MFC cannot scan anything closer than one-eighth inch from the
edge of the paper. The default resolution for a single copy is Super Fine.
Set the resolution to PHOTO for photographs.
1
2
To cancel, press
Do NOT pull on the paper while copying is in progress.

Multiple Copies

You can make multiple copies using your FAX/MFC, and you can choose
whether the copies will be STACKED (all copies of page 1, then all copies
of page 2, etc.) or SORTED (collated). The default resolution for multiple
copies is Fine.
1
2
3
4
If you selected
FULL message while you are scanning the first page, press
the job and restart to make a single copy. If you selected
MEMORY FULL message appears while scanning subsequent pages, you
can press
To restart the copy job using less memory, press

Reducing and Enlarging Copies

When making copies, you can reduce or enlarge the size of the printed image.
To reduce to the size of your selected paper automatically, select AUTO. To
select a reduction ratio, choose 93%, 87%, 75% or 50%. To enlarge a
document, select 150%, 125% or 120%. To print a document at its original
size, select 100%.
Place document face down in the feeder.
Press . (You can press
Copy
copying begins in about 5 seconds.)
.
Stop
Place the document face down in the feeder.
If you want copies "stacked," press
—OR—
If you want copies "sorted" (collated), press
Enter the number (1–99) of copies you want.
Press Copy .
Sort
or STACK after pressing
to copy the portion that is in memory, or press
Copy
S E T U P R E C E I V E
again for faster response—otherwise,
Copy
.
Copy
Sort .
Copy and get a MEMORY
Copy for stacked copies.
47
to cancel
Stop
Sort and the
to cancel.
Stop