Setting Fax Storage; Changing Remote Access Code - Brother FAX 750 Owner's Manual

R E M O T E F A X O P T I O N S ( F O R F A X 7 7 0 O N L Y )

Setting Fax Storage

See Printing a
Fax in Memory
(Only for FAX 770)
p. 40

Changing Remote Access Code

See Operation
from Extension
Telephone
p. 39
If you set Fax Storage to ON, you will be able to retrieve fax messages from
another location, using Fax Forwarding, Paging, or Remote Retrieval functions.
The screen will indicate when you have a fax stored in memory.
1
Press , ,
Function
8
FAX STORAGE:OFF?
SELECT
2
Press or to select ON (or OFF).
3
Press when the screen displays your selection.
Set
4
Press to exit.
Stop
If there are faxes in memory when you turn the Fax Storage OFF, the screens
prompts you to erase any faxes in memory.
ERASE ALL FAX?
1.YES 2.NO
If you press , all fax data is erased and Fax Storage is turned off. If you press
1
, data is not erased, and Fax Storage remains on.
2
Enter your Remote Access Code when the FAX picks up your call, so you
can access features remotely. The access code is preset to 1 5 9 , but you can
change this.
1
Press , ,
Function
8
2
Enter a three-digit number from 000 to 999. The " " cannot be changed.
Do not use the same digits that appear in your Fax Receive or Telephone
Answer Code.
3
Press .
Set
4
Press to exit.
Stop
. The screen prompts you to choose a fax setting.
2
& SET
.
3
73