newmotion Business Pro 2.2 Installation Manual page 30

7 . Plug the Ethernet cable for incoming data into the left Ethernet port of the charge point (see fi gure 45 ).
8 . Repeat steps 2 - 6 for the Ethernet cable for outgoing data coming from the right grommet, as seen from the front.
For Business Lite charge points: Check the project plan to see if the Business Lite charge point is
NOTICE
connected to a next Business Lite charge point. If this charge point is the last in the confi guration, there is no
Ethernet cable for outgoing data.
9 . Plug the Ethernet cable for outgoing data into the right Ethernet port of the charge point (see fi gure 46 ).
10 . For Business Pro charge points: Plug the other Ethernet cable into a free Ethernet port on the router.
For Business Lite charge points: Plug the other Ethernet cable into the left Ethernet port on the next Business Lite
charge point.
Installation manual – NewMotion Business Pro & Lite 2.1 / 2.2 - 091NMEN13
P
A
EN
30