Figure 2-10. Removing Blanking Cover; Figure 2-11. Inserting The Pc Ieee Card - Brainboxes IE-340 User Manual

Installation Guide.
__________________________________

Figure 2-10. Removing Blanking Cover.

____________________________________ _

Figure 2-11. Inserting The PC IEEE Card.

Use the screw kept back from the blanking cover to screw the
PC IEEE 488 interface retaining bracket into the PC back panel
housing.
Chapter 2
PC IEEE Reference
STEP 4 Choose an empty
expansion slot. The PC IEEE
488 interface board will fit
either a full length or a short
slot, a 8 bit PC type slot or a
16 bit AT type slot. In general
it is wise to leave the larger
slots free for those boards that
insist on
Remove the blanking cover
protecting the slot on the PC
back panel. KEEP the blanking
cover screw safely for later.
STEP 5 Now insert the PC
IEEE 488 card in the slot. Be
careful to ensure that the gold
plated pcb fingers fits neatly
into the
connector. Press down firmly
but evenly on the top of the
PC IEEE card.
STEP 6 The 24 way standard
IEEE 488 connector should fit
neatly through
aperture to the outside world.
greater room.
i/o expansion
the slot's
Page 21