Configuring Ports I N Windows 3. X; Configuring Port In Window 3.X; Determining Pci Multiport Rs232 Resources - Brainboxes CC-275 Hardware Manual

Software Configuration
Configuring Ports In Windows 3.x
The Windows 3.x installation procedure consists of 2 steps
after the PCI Quad RS232 card is inserted:
1. Determining the resources that the PCI Quad RS232 has
claimed.
2. Informing Windows 3.x of those resources.

Determining PCI Multiport RS232 Resources.

Insert card into PC, as described in Chapter 2.
Run BBCARDS.EXE, from the supplied DOS utilities disk
titled "Utility Disk" (Version 2.2 Jan 1998 or higher) by typing the
following:
% @"4'-@&&'%6(7
Where A:\ is the drive containing the supplied disk.
BBCARDS.EXE will return a string that looks similar to
the following (values contained in the string may differ in
individual PC's due to resource availability):
PCI Quad Users:
w‚ˆs††‰„ˆÂ€w‚sÂ!!
$‡sˆ‡ÂƒtÂ!&%% qƒ„iˆwp€s†suw‡ˆs†‡
UEUTÂw‡ÂiˆÂEQÂirr†s‡‡Â ! $
PCI Lynx 8 Port Users:
w‚ˆs††‰„ˆÂ€w‚sÂ!!
(‡sˆ‡ÂƒtÂ!&%% qƒ„iˆwp€s†suw‡ˆs†‡
UEUTÂw‡ÂiˆÂEQÂirr†s‡‡Â ! $
Chapter 3 Page 24
PCI Quad / Lynx 8 Port RS232
EQÂirr†s‡‡Â !$
EQÂirr†s‡‡Â !$