Uninstalling Serial Solutions Pci - Brainboxes CC-275 Hardware Manual

PCI Quad / Lynx 8 Port RS232
value will allow the interrupt to be serviced quicker,
which is good for slow machines. If you have a fast
machine, setting a high value will give you more
time for multi-tasking operations.
Transmit Buffer - These settings allow the
selection of a transmitter FIFO trigger setting.
Selecting a low value will send fewer data-bytes per
interrupt, and this is recommended if you are
communicating to a slower machine. Selecting a
high value will send more data-bytes per interrupt,
and will give more time for multi-tasking
operations.
2. Defaults - When clicked this button resets the advanced
properties to the followed settings:
Use FIFO Buffers:
Transmit Buffers:
Receive Buffers:

Uninstalling Serial Solutions PCI.

To uninstall Serial Solutions PCI:
From Control Panel, open the Add/Remove Programs applet,
then close the Control Panel.
Select from the list Serial Solutions PCI.
Click the Add/Remove button.
Windows NT will then uninstall the Serial Solutions PCI applet,
without the need for restarting.
Software Configuration
On (checked)
14
14
Chapter 3 Page 23