Configuring Ports In Dos; Determining Pci Multiport Rs232 Resources - Brainboxes CC-275 Hardware Manual

PCI Quad / Lynx 8 Port RS232

Configuring Ports in DOS.

The DOS installation procedure consists of 2 steps after the
PCI Quad RS232 card is inserted:
1. Determining the resources that the PCI Quad RS232 has
claimed.
2. Informing the Serial Solutions DOS device driver of those
resources.

Determining PCI Multiport RS232 Resources.

Insert card into PC, as described in Chapter 2.
Run BBCARDS.EXE, from the supplied DOS driver disk titled
"Utility Disk" by typing the following:
% @"&&'%6(7
Where A:\ is the drive containing the supplied disk.
BBCARDS.EXE will return a string that looks similar to
the following (values contained in the string may differ in
individual PC's due to resource availability):
PCI Quad Users:
w‚ˆs††‰„ˆÂ€w‚sÂ!!
$‡sˆ‡ÂƒtÂ!&%% qƒ„iˆwp€s†suw‡ˆs†‡
UEUTÂw‡ÂiˆÂEQÂirr†s‡‡Â ! $
PCI Lynx 8 Port Users:
w‚ˆs††‰„ˆÂ€w‚sÂ!!
(‡sˆ‡ÂƒtÂ!&%% qƒ„iˆwp€s†suw‡ˆs†‡
UEUTÂw‡ÂiˆÂEQÂirr†s‡‡Â ! $
Software Configuration
EQÂirr†s‡‡Â !$
EQÂirr†s‡‡Â !$
Chapter 3 Page 31