Brainboxes CC-275 Hardware Manual page 24

Brainboxes cc-275 pci cards: user guide
Table of Contents

Advertisement

Software Configuration
appear greyed out if the Enabling Sharing checkbox
has been un-checked.
Port Index - This is only used for interrupt sharing
cards.
2. FIFO Settings:
Enable FIFO - turns the selected ports FIFO buffer
on or off. It is strongly recommended that the FIFO
for both ports is left enabled.
Receive Buffer - These settings allow the selection
of a receiver FIFO trigger setting. Selecting a low
value will allow the interrupt to be serviced quicker,
which is good for slow machines. If you have a fast
machine, setting a high value will give you more
time for mult i-tasking operations.
Transmit Buffer - These settings allow the
selection of a transmitter FIFO trigger setting.
Selecting a low value will send fewer data-bytes per
interrupt, and this is recommended if you are
communicating to a slower machine. Selecting a
high value will send more data-bytes per interrupt,
and will give more time for multi-tasking
operations.
3. Restore- Clicking on this port will restore the port
setting of the Serial Solutions tab for the selected port
to:
Enable Sharing:
SISR Address:
Port Index:
Enable FIFO:
Receive Buffer:
Transmit Buffer:
Chapter 3 Page 18
PCI Quad / Lynx 8 Port RS232
On (Checked)
3a0
0
On (Checked)
rd
3
from right.
High.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cc-279Pci quad rs232Pci lynx rs232

Table of Contents