Table of Contents
Advertisement
4
Initial Setup
4
Getting Started
After you have assembled your machine using the Brother StartCard, continue the
initial setup by programming the rest of the initial settings.
Setting Date and Time
Your FAX/MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, the FAX/MFC maintains date and time information for
up to two hours. All other settings remain unaffected.
1
Press Function/Set, 1, 1.
2
Enter the last two digits of the year and press
Function/Set.
3
Enter two digits for the month and press
Function/Set. (For example, enter 09 for
September, or 10 for October)
4
Enter two digits for the day and press
Function/Set. (For example, 06)
5
Enter the time in 24-hour format and press Function/Set. (For example, enter 15:25
for 3:25 PM)
6
Press Stop. The screen now displays the date and time you set, and displays it
whenever the FAX/MFC is in Standby mode.
Setting Station ID
You can store your name, fax number, and telephone number to be printed on all fax
pages.
1
Press Function/Set, 1, 2.
2
Enter your fax number (up to 20 digits) and press
Function/Set.
3
Enter your telephone number (up to 20 digits) and
press Function/Set. If your telephone number and
fax number are the same, enter the same number
again. The screen displays your entry.
4
Use the dial pad to enter your name (up to 20 characters) and press Function/Set.
(You can use the chart on next page to help you enter letters.)
5
Press Stop. The screen returns to the date and time.
ENTER YEAR:XX
ENTER MONTH:XX
ENTER DAY:XX
ENTER TIME:XX:XX
FAX:
TEL:
NAME:
I N I T I A L S E T U P
4 - 1
Advertisement
Table of Contents
