Setting Volume Amplify - Brother 575 User Manual

VOLUME AMPLIFY: ON–TEMPORARY
This setting is appropriate if some of the users are
hearing-impaired. During a conversation, users can press
or on the control panel to adjust the volume to LOW or
HIGH. When the handset is replaced, the handset volume returns
to the default setting of LOW.
VOLUME AMPLIFY:ON–PERMANENT
Choose VOL AMPLIFY: ON?–PERMANENT? if all of the users are
hearing-impaired. During a conversation, users can press
or on the control panel to adjust the volume to LOW or
HIGH. When the handset is replaced, the handset volume returns
to the default setting of amplify.
When you press
the volume, the LCD shows the setting you are choosing.
Each key press changes the volume to the next setting.
It is important that you do not choose PERMANENT unless all
users are hearing-impaired. Otherwise, the default setting of
amplify may damage the hearing of some users.

Setting Volume Amplify

Please carefully read Choosing the Handset Volume (For
Volume Amplify) on page 4-4 before you do the following
steps:
1
Press Menu/Set, 1, 4.
2
If none of the users are
hearing-impaired, press ▲ or ▼ to select
VOL AMPLIFY:OFF?, and then press Menu/Set and go to
Step 4.
—OR—
If some or all of the users are hearing-impaired, press ▲ or ▼
to select VOL AMPLIFY:ON?, and then press Menu/Set.
3
If all the users are hearing-impaired, press ▲ or ▼ to select
PERMANENT?, and then press Menu/Set.
—OR—
If only some of the users are hearing-impaired, press ▲ or ▼
to select TEMPORARY, and then press Menu/Set.
4
Press Stop/Exit.
4 - 5
Initial Setup
or on the control panel to adjust
4.VOLUME AMPLIFY