Table of Contents
Advertisement
Memory Transmission
This feature allows the fax machine to scan a fax into its memory
and send it as soon as the scan is complete. This way, you don't
have to wait for the entire fax to be transmitted before you retrieve
your document.
1
Insert the document face down in the ADF.
2
Press Menu/Set, 3, 9.
3
To change the default setting,
press ▲ or ▼ to select ON (or
OFF).
Press Menu/Set.
Go to Step 5.
—OR—
For the next fax transmission only, press ▲ or ▼ to select
NEXT FAX ONLY.
Press Menu/Set.
4
For the next fax only, press ▲ or ▼ to select ON (or OFF).
Press Menu/Set.
5
Press 1 to choose more settings. The LCD returns to the
SETUP SEND menu.
—OR—
Press 2 if you have finished choosing settings and go to
Step 6.
6
Enter fax number and press Fax Start.
Out of Memory message
If you get an OUT OF MEMORY message while scanning the first
page of a fax, press Stop/Exit to cancel the scan. If you get an
OUT OF MEMORY message while scanning a subsequent page,
you will have the option to press Fax Start to send the pages
scanned so far, or to press Stop/Exit to cancel the operation.
If the faxes you send are typically very large or detailed, you
may get OUT OF MEMORY errors frequently. If this happens,
change the Memory Transmission setting back to OFF.
6 - 12
Setup Send
9.MEMORY TX
MEMORY TX:ON?
↑ ↓
SELECT
& SET
Advertisement
Table of Contents
