Table of Contents
Advertisement
ERROR MESSAGES
ERROR
MESSAGE
NOT REGISTERED
OUT OF MEMORY
CLEAR MEMORY
PAPER JAM
PLS OPEN COVER
REMOVE JAM
PHONE LINE BUSY
POLLING FAILED
PRINTHEAD
OVERHEATED
WAIT TO COOL
RECEIVE FAILED
RIBBON EMPTY
RESET OR REPLACE
CAUSE
You tried to access a
One-Touch or Speed-Dial
number that is not
programmed.
The data is too large for
the fax machine's
memory.
The paper is jammed in
the fax machine.
The number you dialed
does not answer or is
busy.
You tried to poll a fax
machine that is not in
Polled Waiting mode.
The print head has
overheated.
Poor phone line quality
caused a communication
error.
Your fax machine is out of
ribbon or the print cartridge
is not properly installed.
Troubleshooting and routine maintenance
ACTION
Set up the One-Touch or
Speed-Dial number. (See
Storing One-Touch Dial
numbers on page 7-1 and
Storing Speed-Dial numbers
on page 7-2.)
(Fax sending or copy
operation in process)
Press Stop/Exit and wait
until the other operations in
progress finish and then try
again.
—OR—
Clear the faxes and
schedule jobs in the
memory. To gain extra
memory, you can turn off
Fax Storage. (Setting Fax
Storage on page 8-3.)
—OR—
Print the faxes that are in the
memory. (Printing a fax from
the memory on page 5-6)
(See Paper Jam on page
12-5.)
Verify the number and try
again.
Check the other fax
machine's polling setup.
Wait 30 minutes for it to cool
or wait until the message
disappears automatically.
If the problem continues, call
the telephone company and
ask them to check your
phone line.
Install the print cartridge or
change the ribbon again.
(See Changing the ribbon on
page 12-9.)
12 - 2
Advertisement
Table of Contents
