Quick Reference Guide; Sending Faxes; Receiving Faxes; Storing Numbers - Brother 575 User Manual

Quick Reference Guide

Sending faxes

Automatic transmission
1
Insert the document face
down in the ADF (up to 10
pages).
2
Enter the fax number you
want to call.
3
Press Fax Start.

Receiving faxes

Select Receive Mode
1
Press Receive Mode to
select FAX ONLY,
FAX/TEL,
TAD:ANSWER MACH. or
MANUAL. If you select
FAX/TEL, make sure you
set Ring Delay and F/T
Ring Time. (See Setting
the Ring Delay on page
5-2 and Setting the F/T
Ring Time (FAX/TEL
mode only) on page 5-3.)

Storing numbers

Storing One-Touch Dial
numbers
1
Press Menu/Set, 6, 1.
2
Press a One-Touch key
where you want to store a
number.
3
Enter a number (up to 20
digits), and then press
Menu/Set.
4
Enter a name (up to 15
characters) or leave it
blank, and then press
Menu/Set.
5
Press ▲ or ▼ to select the
type of number and press
Menu/Set.
6
Press Stop/Exit.
Storing Speed-Dial numbers
1
Press Menu/Set, 6, 2.
2
Using the dial pad, enter a
two-digit Speed-Dial
location number (00-99),
and then press Menu/Set.
3
Enter a number (up to 20
digits), and then press
Menu/Set.
4
Enter a name (up to 15
characters) or leave it
blank, and then press
Menu/Set.
5
Press ▲ or ▼ to select the
type of number and press
Menu/Set.
6
Press Stop/Exit.
Dialing operations
One-Touch Dialing
1
Insert the document face
down in the ADF.
2
Press the One-Touch key
of the number you want to
call.
3
Press Fax Start.
Speed-Dialing
1
Insert the document face
down in the ADF.
2
Press
Search/Speed-Dial, then
press # and the two-digit
Speed-Dial number.
3
Press Fax Start.
ix