Itm HOLEMAKER HMSPECIAL 60 Operator's Manual
  1. Manuals
  2. Brands
  3. Itm Manuals
  4. Drill
  5. HOLEMAKER HMSPECIAL 60
  6. Operator's manual

Itm HOLEMAKER HMSPECIAL 60 Operator's Manual

Portable magnetic drilling machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HOLEMAKER PRO 50
HOLEMAKER PRO 50
Holemaker Portable Magnetic Drilling Machine
OPERATOR'S MANUAL
Holemaker Portable Magnetic Drilling Machine
OPERATOR'S MANUAL
BEFORE USE
BEFORE USE
EYE PROTECTION
REQUIRED
EYE PROTECTION
REQUIRED
S
r e
a i
# l
Ver: 1.10
14/08/2015
S
r e
a i
# l
Ver: 1.10
14/08/2015
WARNING!
,
ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
WARNING!
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL
OPERATOR'S MANUAL
,
ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL
DRILLING MACHINE
HEARING PROTECTION
NEVER PLACE
WITH ELECTROMAGNETIC BASE
REQUIRED
FINGERS NEAR
CUTTING AREA OR
MACHINE ARBOR
HEARING PROTECTION
NEVER PLACE
REQUIRED
FINGERS NEAR
CUTTING AREA OR
MACHINE ARBOR
ul. Elewatorska 23/1, 15-620 Białystok, Poland
Phone: +48 85 678-34-95, Fax: +48 85 662-78-77
www.promotech.eu
LINE VOLTAGE
PRESENT
P
R
O
5
LINE VOLTAGE
2
T
P
R
O
5
2
T
PRESENT
D
a
e t
f o
P
r u
h c
e-mail:
info@promotech.eu
D
a
e t
f o
P
r u
h c
.
.
BEWARE OF
ROTATING
MACHINE PARTS
BEWARE OF
ROTATING
MACHINE PARTS
a
e s
a
e s

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HOLEMAKER HMSPECIAL 60 and is the answer not in the manual?

Questions and answers

Related Manuals for Itm HOLEMAKER HMSPECIAL 60

Summary of Contents for Itm HOLEMAKER HMSPECIAL 60

  • Page 1 HOLEMAKER PRO 50 HOLEMAKER PRO 50 Holemaker Portable Magnetic Drilling Machine OPERATOR’S MANUAL Holemaker Portable Magnetic Drilling Machine OPERATOR’S MANUAL WARNING! BEFORE USE ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS WARNING! ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL OPERATOR’S MANUAL BEFORE USE ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS...

  • Page 2: Table Of Contents

    Contents 1. GENERAL INFORMATION ....................3 1.1. Application ......................... 3 1.2. Technical data......................3 1.3. Equipment included ....................4 1.4. Dimensions ........................ 5 1.5. Design ........................6 2. SAFETY PRECAUTIONS ....................7 3. STARTUP AND OPERATION ................... 9 3.1. Installing the handles ....................9 3.2.

  • Page 3: General Information

    PRO 52T 1. GENERAL INFORMATION 1.1. Application The HMSPECIAL60 is a drilling machine designed to drill holes with diameters of up to 60 mm by using annular cutters. The machine can also drill holes with diameters of up to 23 mm by using twist drill bits. The machine can change the direction of rotation.

  • Page 5: Dimensions

    PRO 52T 1.4. Dimensions 333 mm (13.1″) 259 mm (10.2″) This document is protected by copyrights. Copying, using, or distributing without permission of PROMOTECH is prohibited.

  • Page 7: Safety Precautions

    PRO 52T 2. SAFETY PRECAUTIONS 1. Before use, read this Operator’s Manual and complete a training in occupational safety and health. 2. Use only in applications specified in this Operator’s Manual. 3. Make sure that the machine has all parts and they are genuine and not damaged. 4.
  • Page 8 PRO 52T 21. Do not use on surfaces that are rough, not flat, not rigid, or have rust, paint, chips, or dirt. 22. Do not use if the gibs are adjusted incorrectly. 23. Do not use if there is no grease on the gibs. 24.

  • Page 9: Startup And Operation

    PRO 52T 3. STARTUP AND OPERATION 3.1. Installing the handles Attach the handles to the feed shaft. You can install the shaft so that the handles are on the opposite side of the machine. To do this, lift the motor to the maximum and continue in the sequence that follows.

  • Page 13: Installing And Removing The Screw Tap

    PRO 52T 3.4. Installing and removing the screw tap Install the tap chuck as described before. Next, put the screw tap into the correct adapter (1). Install the adapter into the tap chuck (2). To remove the screw tap, unlock it and remove from the adapter. This document is protected by copyrights.

  • Page 15: Preparing

    PRO 52T 3.6. Preparing Before use, clean steel parts, including the MT2 socket, from anti-corrosion material used to preserve the machine for storage and transport. Attach the handles to the feed shaft. You can install the shaft so that the handles are on the opposite side of the machine.
  • Page 25 Parts list PRO 52T v.0.01 ITEM PART NUMBER DESCRIPTION UKL-0600-11-00-00-0 COOLANT SYSTEM ASSY This document is protected by copyrights. Copying, using, or distributing without permission of PROMOTECH is prohibited.

  • Page 26: Mt2 Tap Chuck × 31 Mm With Adapter

    Parts list PRO 52T v.0.01 ITEM PART NUMBER DESCRIPTION DZW-0212-12-00-00-0 SPOKE HANDLE ASSY PAS-000008 5 MM HEX WRENCH KLC-000005 2.5 MM HEX WRENCH KLC-000037 5 MM HEX WRENCH WITH HANDLE KLC-000003 8 MM COMBINATION WRENCH KLN-0103-01-00-00-0 WEDGE MT2 KLC-0600-10-00-00-0 4 MM HEX WRENCH SKR-000017 UCW-0220-00-00-01-0 ARBOR ASSY AMT2-C-19/2-2...
  • Page 27 Parts list PRO 52T v.0.01 14 15 ITEM PART NUMBER DESCRIPTION SLN-0600-01-00-00-0 MOTOR – 115V SLN-0600-01-00-00-1 MOTOR – 230V SRB-000083 HEX SOCKET HEAD CAP SCREW M5x16 PDK-000044 SPRING WASHER 5.1 MCW-0600-04-00-00-0 COOLANT BOOTLE BRACKET WKR-000413 CROSS RECESSED PAN HEAD SCREW M5x6 This document is protected by copyrights.

  • Page 28: Vacuum Base

    Parts list PRO 52T v.0.01 WKR-000395 HEX SOCKET ROUND HEAD SCREW WITH FLANGE M5x20 PDK-000151 NYLON WASHER 8.1x14x3 OSL-0600-05-00-00-0 GUARD SPR-000030 PUSH SPRING 1x10x17.5 TLJ-0399-06-00-00-0 SLEEVE ZSP-0600-02-00-00-0 GEARBOX ASSY DYS-0399-05-00-00-0 STOP ROD KRP-0600-03-01-00-0 BODY ASSY LST-0600-03-01-03-0 SRB-000085 HEX SOCKET SCREW M5x16 PDK-000017 WASHER 5,3 LST-0600-03-01-02-0...
  • Page 29 Parts list PRO 52T v.0.01 22 23 ITEM PART NUMBER DESCRIPTION WKR-000529 TORX PAN HEAD SCREW 4x50 PKR-0563-01-06-00-0 STATOR COVER ASSY This document is protected by copyrights. Copying, using, or distributing without permission of PROMOTECH is prohibited.
  • Page 30 Parts list PRO 52T v.0.01 ITEM PART NUMBER DESCRIPTION PKT-0563-01-06-04-0 POTENTIOMETER KNOB PTN-000039 POTENTIOMETER OSL-0563-01-06-02-0 BUTTON COVER PKR-0563-01-06-01-0 STATOR COVER MDL-0563-80-05-01-0 KEYBOARD MODULE (OB1) TLJ-000151 INSULATION SLEEVE 2.6x3.9 WKR-000458 SCREW FOR PLASTIC 2.2x8 PRS-000238 EXTERNAL RETAINING RING 16z SYG-0563-01-05-01-0 SIGNALLER MDL-0563-80-04-00-0 SIGNALING MODULE (LB1) WKR-000506...
  • Page 31 Parts list PRO 52T v.0.01 ITEM PART NUMBER DESCRIPTION WLK-0630-02-02-00-0 CLUTCH SHAFT ASSY PDK-0211-00-16-00-0 WASHER 8,1x13x1 LOZ-000006 NEEDLE BEARING 8x12x10 This document is protected by copyrights. Copying, using, or distributing without permission of PROMOTECH is prohibited.
  • Page 32 Parts list PRO 52T v.0.01 ITEM PART NUMBER DESCRIPTION KOL-0630-02-03-00-0 GEAR z42 z54 m=1 WLK-0600-02-04-00-0 GEAR SHAFT z15 m=1,5 WPS-0563-02-20-00-1 PARALLEL KEY 4x4x25 PDK-000164 WASHER 12x18x1 LOZ-000171 NEEDLE BEARING 12x18x12 PRS-000322 EXTERNAL RETAINING RING 24z KOL-0600-02-03-00-0 GEAR z42 m=1,5 WPS-0630-02-08-00-0 PARALLEL KEY 6x6x16 LOZ-000028 BALL BEARING 25x47x12...

Table of Contents