1. Manuals
  2. Brands
  3. Itm Manuals
  4. Drill
  5. HOLEMAKER PRO 35
  6. Operator's manual

Itm HOLEMAKER PRO 35 CORDLESS Operator's Manual

Portable magnetic drilling machine
Hide thumbs Also See for HOLEMAKER PRO 35 CORDLESS:
Table of Contents

Advertisement

Quick Links

Download this manual
HOLEMAKER PRO 50
HOLEMAKER PRO 35 CORDLESS
HOLEMAKER PRO 50
Holemaker Portable Magnetic Drilling Machine
OPERATOR'S MANUAL
Holemaker Portable Magnetic Drilling Machine
Holemaker Portable Magnetic Drilling Machine
OPERATOR'S MANUAL
OPERATOR'S MANUAL
BEFORE USE
BEFORE USE
EYE PROTECTION
REQUIRED
EYE PROTECTION
REQUIRED
S
r e
a i
# l
Ver: 1.01 27/09/2023
Ver: 1.20
07/10/2015
S
r e
a i
# l
WARNING!
,
ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
WARNING!
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL
OPERATOR'S MANUAL
,
ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL
BATTERY DRILLING MACHINE
HEARING PROTECTION
NEVER PLACE
REQUIRED
FINGERS NEAR
WITH ELECTROMAGNETIC BASE
CUTTING AREA OR
MACHINE ARBOR
HEARING PROTECTION
NEVER PLACE
REQUIRED
PRO-36 Battery
FINGERS NEAR
CUTTING AREA OR
MACHINE ARBOR
ul. Elewatorska 23/1, 15-620 Białystok, Poland
Phone: +48 85 678-34-95, Fax: +48 85 662-78-77
www.promotech.eu
LINE VOLTAGE
PRESENT
LINE VOLTAGE
PRESENT
D
a
e t
f o
P
r u
h c
e-mail:
info@promotech.eu
D
a
e t
f o
P
r u
h c
.
.
BEWARE OF
ROTATING
MACHINE PARTS
BEWARE OF
ROTATING
MACHINE PARTS
a
e s
a
e s

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HOLEMAKER PRO 35 CORDLESS and is the answer not in the manual?

Questions and answers

Related Manuals for Itm HOLEMAKER PRO 35 CORDLESS

Summary of Contents for Itm HOLEMAKER PRO 35 CORDLESS

  • Page 1 HOLEMAKER PRO 50 HOLEMAKER PRO 35 CORDLESS HOLEMAKER PRO 50 Holemaker Portable Magnetic Drilling Machine OPERATOR’S MANUAL Holemaker Portable Magnetic Drilling Machine Holemaker Portable Magnetic Drilling Machine OPERATOR’S MANUAL OPERATOR’S MANUAL WARNING! BEFORE USE ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS...

  • Page 2: Table Of Contents

    HMPRO35-18V OPERATOR’S MANUAL LIMITED WARRANTY Industrial Tool & Machinery Sales (hereinafter referred to as ITMS) will, within twelve (12) months from the original date of purchase, repair or replace any goods found to be defective in materials or workmanship. This warranty is void if the item has been damaged by accident, neglect, improper service or other causes not arising out of defects in materials or workmanship.

  • Page 3: General Information

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 1. GENERAL INFORMATION 1.1. Application The PRO 35 Cordless is a drilling machine designed to drill holes of diameters up to 35mm with T.C.T. annular cutters and up to 30mm (1.18″) with HSS annular cutters. The machine can also drill holes of diameters up to 12mm (0.47″) by using twist drill bits.

  • Page 4: Equipment Included

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 1.3. Equipment included 1 Drilling machine with cooling system 1 unit 2 Safety strap 1 unit ″ 3 4 mm (0.16 ) hex wrench with a handle 1 unit 4 Handle 3 units 5 Battery 18 V LiHD 4.0 Ah 1 unit 6 Box 1 unit...

  • Page 5: Dimensions

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 1.4. Dimensions 316 mm (12.44″) 235 mm (9.25″) 1.5. Design Carrying handle Battery Battery lock Feed shaft Motor START Motor STOP Bottle valve lever Electromagnetic base switch (MAGNET) Chip guard Control panel LED indicator Hole for a safety strap Electromagnetic base Spindle with arbor www.itmtools.com.au...

  • Page 6: Safety Precautions

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 2. SAFETY PRECAUTIONS 1. Before use, read this Operator’s Manual and complete a training in occupational safety and health. 2. Use only in applications specified in this Operator’s Manual. 3. Keep the machine and the battery away from children. 4.
  • Page 7 HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 22. Always secure the machine with a safety strap. Use the safety strap to attach the machine to a stable structure. Put the strap through the hole in the machine body. In the horizontal position, attach the strap to the carrying handle. Do not put the strap into the buckle from the front.
  • Page 8 HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 38. Acid flammable liquid may leak from defective battery. If the liquid comes in contact with your skin or eyes, rinse them immediately with clean water and seek medical attention. 39. When you transport the battery, familiarize yourself with hazardous goods carriage regulations (UN 3480 and UN 3481).

  • Page 9: Symbols

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 3. SYMBOLS Before using the machine, read the description of the following symbols. Wear eye protection Wear ear protection Refer to instruction manual Warning of flammable substances Warning of corrosive substances www.itmtools.com.au This document is protected by copyrights. Copying, using, or distributing without permission of PROMOTECH is prohibited.

  • Page 10: Startup And Operation

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 4. STARTUP AND OPERATION 4.1. Tools compatible with drilling machine The drilling machine can be used with tools listed in the following table. Maximum tool Tool holder Tool Application diameter TCT annular cutter 35 mm Drilling through holes HSS annular cutter 30 mm...

  • Page 11: Application Of A Cooling System

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery When you use an annular cutter, drill only through holes. Do not use the pilot pin for incomplete through holes. Incomplete through holes Complete through holes 4.3. Application of a cooling system The drilling machine is equipped with the gravity cooling system. Install the cooling system when you drill vertically with an annular cutter.

  • Page 12: Checking The Battery Charge Level

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 4.5. Checking the battery charge level Charge the battery before first use. To check the charge level, press the charge status button. If only one LED on the charge indicator flashes green, charge the battery. Do not charge fully charged battery.

  • Page 13: Installing And Removing The Battery

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 4.6. Installing and removing the battery Slide the battery in (1) until it locks into place. Press and hold the battery lock (2) to remove the battery (3). 4.7. Clamping surface requirements The ferromagnetic surface to which the drilling machine is clamped must be at least 6 mm (0.24”) thick.

  • Page 14: Securing The Machine With A Safety Strap

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 4.8. Securing the machine with a safety strap Always secure the machine with a safety strap! It prevents the machine from falling if it loses the clamping. Attach the machine to a stable structure by putting the strap through the hole in the machine body.

  • Page 15: Preparing

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 4.10. Preparing 1. Clean steel parts, including the spindle, from the anti-corrosion material used to preserve the machine during storage and transport. 2. Attach the handles to the feed shaft. 3. Put the machine on a workpiece. 4.

  • Page 16: Drilling

    HMPRO35-18V OPERATOR’S MANUAL PRO-36 Battery 4.11. Drilling 1. Press the Motor START button to start the motor. 2. Turn the handles to the left to put the tool into the workpiece. Do not change the position of the drilling machine while making the hole. When the annular cutter goes through the workpiece, the slug core is pushed out with a large force.

  • Page 17: Parts List

    HMPRO35-18V OPERATOR’S MANUAL Parts list Battery v.0.05 5. PARTS LIST Part Number Description SKR-0688-99-00-00-0 PLASTIC BOX AKM-000089 BATTERY PAS-000007 FASTENING BELT UKL-0716-04-00-00-0 COOLING SYSTEM DZW-0212-12-00-00-0 LEVER KLC-000036 HEX WRENCH 4 MM WITH HANDLE www.itmtools.com.au Dokument chroniony prawem.
  • Page 18 HMPRO35-18V OPERATOR’S MANUAL Parts list Battery v.0.05 www.itmtools.com.au Dokument chroniony prawem. Kopiowanie, wykorzystywanie lub rozpowszechnianie bez zgody PROMOTECH zabronione.
  • Page 19 HMPRO35-18V OPERATOR’S MANUAL Parts list Battery v.0.05 Part Number Description SRB-000064 HEX SOCKET HEAD CAP SCREW M4x16 PKR-0688-12-00-00-0 CONTROLLER LID WKR-000183 CROSS RECESSED PAN HEAD SCREW M4x10 WKR-000106 HEX SOCKET BUTTON HEAD SCREW M8x16 RAM-0688-08-00-00-0 HANDLE ARM - RIGHT UCW-0676-02-01-03-0 HANDLE RAM-0688-07-00-00-0 HANDLE ARM - LEFT...
  • Page 20 HMPRO35-18V OPERATOR’S MANUAL Parts list Battery v.0.05 Part Number Description PDK-000035 ROUND WASHER 4.3 STR-0688-13-00-00-0 MOTOR CONTROLLER PKR-0688-15-00-00-0 PLANETARY GEAR LID ZCS-000029 CABLE TERMINAL PKL-0688-02-00-00-0 PLANETARY GEAR WZK-0688-09-00-00-0 MOTOR HARNESS NKR-000040 STRAIN RELIEF NUT PG11 SMR-000009 GREASE 0,11 * - not shown in the drawing Part Number Description PKL-0688-02-00-00-0...
  • Page 21 WZK-0688-09-00-00-0 MOTOR HARNESS SMR-000009 GREASE 0,11 NKR-000040 STRAIN RELIEF NUT PG11 * - not shown in the drawing SMR-000009 GREASE 0,11 * - not shown in the drawing HMPRO35-18V OPERATOR’S MANUAL Part Number Description PKL-0688-02-00-00-0 PLANETARY GEAR Part Number Description KOL-0688-02-03-00-0 GEAR z62 PKL-0688-02-00-00-0...
  • Page 22 HMPRO35-18V OPERATOR’S MANUAL Parts list Battery v.0.05 www.itmtools.com.au Dokument chroniony prawem. Kopiowanie, wykorzystywanie lub rozpowszechnianie bez zgody PROMOTECH zabronione.

Table of Contents