Lucent Technologies MERLIN 1030 Planning Manual page 32

L.
System Speed Dial Numbers
If you want to store numbers that anyone in your business can dial using
a 3-character code, fill in these numbers on the System Speed Dial Direc-
tory, page 14. You can associate up to 40 digits and special characters,
including pause (p), recall (r), and Touch-Tone Enable (t), with each System
Speed Dial code. Remember to precede your marked Speed Dial codes
with an asterisk (the asterisk counts as a digit).
M.
Group Page Groups
If you plan to use the Group Page feature, which allows people to receive
paging messages through their voice terminal speakers, you need to
assign intercom numbers to Group Page groups. On the Group Page
Directory, page 15, fill in the intercom numbers and names of people
designated for each group. You may establish up to seven groups, each
covering a maximum of ten people.
N.
Allowed Lists
If you need to restrict the numbers that certain people can call, but you
want them to be able to call some specific area codes or exchanges for
business reasons, list the allowed area codes and exchanges on the
Allowed-List Directory, page 16. Each entry can have up to six digits (for
example, an area code followed by an exchange). You may create up to
eight lists, each containing a maximum of ten allowed numbers.
NOTE: If you decided not to use Automatic Route Selection, skip to the next
section, titled "Voice Terminal Options."
5