Lucent Technologies MERLIN 1030 Planning Manual page 34

VOICE TERMINAL OPTIONS
Now that you've completed the System Configuration Form, begin filling out Voice
Terminal Configuration Forms, one for each voice terminal in your system. You may
want to begin by creating a system directory and planning which intercom number
and which type of voice terminal each person will use. (The system directory form
is included in your control unit's installation kit.)
On pages 11 through 13, there are forms for voice terminals in square systems and
pooled systems, and for attendant consoles. Make photocopies of these forms so
you can fill out an appropriate form for each of your voice terminals (since some of
the forms are for pooled systems and some are for square systems, be sure you
photocopy the ones that are appropriate for your system).
Q.
Basic Information
Fill in an intercom number (10 through 39 for Model 1030 configured as
a 1030, 10 through 29 for Model 1030 configured as a 1520, and 10 through
79 for Model 3070 configured as a 3070) and the user's name. Fill out a
form for intercom 10 first (this should be your primary attendant's console;
refer to your System Configuration Form for the intercom numbers for ad-
ditional attendant consoles), then fill out forms for remaining intercoms
in numerical order without skipping numbers. On each Voice Terminal
Configuration Form, check the appropriate boxes to indicate voice ter-
minal size, the type of voice terminal stand, and the type of accessories
used with the voice terminal. Group basic telephones together (for exam-
ple, reserve intercom numbers 60 through 69 for basic telephones) and
use remaining intercom numbers for MERLIN system voice terminals.
R.
Assigning Lines (Pooled Systems)
If you have a square system or if the voice terminal serves as an atten-
dant console, skip to box T. Otherwise, the first two buttons above the inter-
com buttons will be used for Dial Access to Line Pools or for Button Access
to the main pool (access code 9). Assign any additional lines or pools to
separate buttons. Remember not to assign lines or pools to buttons in the
columns to the right of the dial pad on 34-button voice terminals, since
these buttons do not have lights. Write the line or pool numbers or names
in the numbered buttons on the Voice Terminal Configuration Form. Fill
in the button labeled "1" first, then "2," "3," and so on.
S.
Dial Access to Line Pools
If you selected the Dial Access to Line Pools option, and the person us-
ing a particular voice terminal will use dial codes to select lines, list the
dial codes in the lower left of the Voice Terminal Configuration Form. Refer
to the System Configuration Form to check which lines are assigned to
line pools.
7