Risk Of Electric Shock - TDK-Lambda Genesys GENH Series User Manual

RISK OF ELECTRIC SHOCK

High Voltage Warning
Dangerous voltages are present within the power supply. To avoid injuries, always disconnect power,
discharge circuits and remove external voltage sources before touching components.
Class I Warning
The unit is Class I product. To minimize electrical shock hazard, the unit must be reliably earthed and
professionally installed. Any interruption of the protective ground conductor or disconnection of the
protective earth terminal will cause a potential shock hazard that might cause personal injury. Energy
Hazards Warning: The main output of the unit is hazardous energy (240VA) and must not be user accessible
in the end application.
Hazardous output Warning
There is a potential shock hazard when using a power supply with an output voltage greater than 60VDC.
Do not turn ON power supply when output voltage is above 60VDC without output bus-bars/or output
connectors protection assembled. Turn OFF power supply or disconnect power supply from AC mains
before making or changing any rear panel connection.
Internal fuse Caution
Internal fuse protects the unit and must not be replaced by the user. In case of internal defect, the unit
must be returned to TDK-Lambda Ltd. or one of their authorized agents.