Cancelling A Print Job; Downloading Fonts, Graphics, And Upgrades To The Pb42/Pb42C - Intermec PB42 User Manual

Cancelling a Print Job

Downloading Fonts, Graphics, and Upgrades to the
PB42/PB42c
26
You can cancel or stop a print job at any time during the
printing process. You may find this feature helpful if you make a
mistake entering data or send incomplete information. This
procedure only works if you are in the process of sending a print
job or the printer is currently printing a print job. Otherwise,
pressing both buttons will print the configuration test page
information.
To cancel a print job
1 Press and hold the Feed and Radio buttons until the printer
beeps. The printer prints out the message "Print Job(s)
Cancelled by User" and asks you to wait a few seconds.
2 Cancel the print job from the CK60, 700, or host PC. The
PB42/PB42c clears the print job and warm boots or resets
itself.
3 Start sending print jobs to the PB42/PB42c again when you
see the message "Printer Online."
You can download fonts, graphics and firmware upgrades to the
PB42/PB42c from your handheld computer using files available
from the Intermec website. There are two ways to download files
to your PB42/PB42c:
• You can download a self-extracting cabinet files (.cab) to copy
onto your handheld computer. When you double-click the
.cab file, the handheld computer sends the files down to the
PB42/PB42c.
• You can download a SmartSystems™ bundle (.exe) to your
PC and use SmartSystems to send the files down to multiple
PB42/PB42c printers. SmartSystems is available from the
Intermec website at
www.intermec.com/products/smrtsysfoundation/index.aspx.
PB42/PB42c Portable Receipt Printer User's Guide