Upgrading The Printer Firmware Using Printset - Intermec UVE 10 PB21 User Manual

•
When upgrading your firmware, make sure the battery in the
printer is fully charged. If the printer loses power during the
upgrade, the printer may be permanently damaged.

Upgrading the Printer Firmware Using PrintSet

You can only upgrade your printer using PrintSet when the printer is
running IPL, Fingerprint, or ESC/P printer languages. To upgrade the
printer using PrintSet, you need to install PrintSet on your PC and
purchase a serial cable (P/N 075497).
2 Connect your printer to your printer using a serial cable. For help,
3 Download the firmware upgrade file (.bin) to your PC:
PB21 and PB31 Mobile Receipt Printer User Guide
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
a serial cable and a communications program, such as
HyperTerminal.
1 If your printer is running ZSim or DSim, change the printer
language to IPL, Fingerprint, or ESC/P. For help, see
the Printer Language" on page
see "Connecting the Printer Through the Serial Port" on
page 29.
a Go to www.intermec.com.
b Click Support > Downloads.
c Use the Product Category, Product Family, and Product
fields, to select the printer model.
d Click Submit. The available software appears.
e Download the latest firmware version to your PC.
f Extract the .zip file to a folder on your PC.
V10 CONSUMIBLES S.L.
Chapter 2 — Configuring the PB21 and PB31
7.
"Changing
37