Alarm Config; Alarm Schedule Settings; Table 17: Motion Detection; Figure 30: Alarm Schedule - Grandstream Networks GSC3620 User Manual

Region Config
Clear Selected Region
Sensitivity
Select Alarm Schedule
Select Alarm Action
Profile

Alarm Config

This page specifies the configuration of Abnormal Reboot Alarm Action.
Enable Abnormal
Reboot Alarm
Select Abnormal
Reboot Alarm Action
Profile

Alarm Schedule Settings

This page specifies the configuration of Alarm Schedule.
Note: Schedule must be configured first to allow the alarm to take the related action.

Table 17: Motion Detection

Configures the motion detection region. First click to access the Region
Config menu and second click to quit.
Selects a zone on the screen then click on "Clear" to delete the region.
Specifies the region sensitivity (value between 0-100%).
Selects the alarm schedule.
Selects the programmed Alarm Action profile.
When checked, the IPC will sent an email if there is a power outage, which
could affect the Auto-Focus as the AF might be affected after this power
failure causing all the later on recording to become unclear. Thus the email
will help the administrator to login and take corrective actions.
If all preset zones have triggered an alarm within the configured time (in
Seconds), this will be considered as a valid alarm/event, otherwise it will be
an invalid alarm.

Figure 30: Alarm Schedule

GSC362X Series User Manual
Version 1.0.5.3
P a g e | 46