Hardware Installation; Mounting Gsc3620; Figure 3: Mounting Gsc3620 - Grandstream Networks GSC3620 User Manual

HARDWARE INSTALLATION

Mounting GSC3620

Step 1: Use supplied drill template to drill holes at ceiling. Select appropriate anchors or screws based on
ceiling material.
Step 2: Remove the top cover of the camera by
turning it counterclockwise as shown in the figure
below. Refer to the arrow and small notch on the
machine body as shown below to align the machine
cover.
Step 3: Place the cable into the groove of camera
cover, mount the cover into ceiling using provided
screws as shown in below diagram. Leave the
connectors of cable dangling outside the cover.
Step 4: Hold the body of camera and align to the
notch as shown in the diagram, then push the body
of camera into the cover of camera already
mounted at the ceiling.

Figure 3: Mounting GSC3620

GSC3620 Series User Manual
Version 1.0.5.3
P a g e | 16