Alarm Settings
This page allows users to configure alarm schedule and alarm actions.
Alarm Events Config
This page allows users to configure GSC3620 events to trigger programmed actions within predefined
schedule.
Motion Detection Mode
Figure 28: Alarm Events Config page
Table 16: Alarm Events Config Settings
Default Alarm Mode: Single zone independent alarm
Sequence Alarm Mode: Set the sequence of multi-zone alarms.
Alarm will trigger if matched the configured zone sequence,
otherwise alarm will not trigger.
Multi-zone Combined Alarm Mode: Alarm will trigger when
number of combined alarming zones reaches the configured
amount, otherwise alarm will not trigger.
Zone Trigger Ratio Alarm Mode: Configure the ratio of single
small squares compared to the whole alarm zone, alarm will trigger
when the ratio reached.
GSC362X Series User Manual
Version 1.0.5.3
P a g e
|
44